1. Wipe wall with rubbing alcohol. Do not use household cleaners or water.

2. Separate strips. Click strips together.

3. Remove one side of liners. Stick on object as shown. Press firmly.

4. Remove remaining liners. Press object firmly to wall.

5. To ensure adhesive hold, temporarily remove frame from wall to reinforce strips. Peel frame as shown. Press each strip on wall for 30 sec.

6. Wait 1 hour for adhesive to build. Align strips. Press frame until each pair of strips clicks.

To remove strips:

1. Remove the object by grabbing the thickest part and peeling the object up and away from the wall. Don't pull straight off.

2. Remember to never pull the strips towards you or peel from the wall

3. Slowly stretch the strip straight down, keeping your hand against the wall as you go.